[asterisk-users] Sangoma A102d and Asterisk on Debian 3.1.

[Markus Monka]

Hi,

try to set the TDMV_DCHAN = 16 (E1) or 24 (T1).

I had the same problem while updating from 2.3.4-(2|3) to 2.3.4-7 .
I think, that wancfg did not set this value correctly.

In my setup i updated an running system to new version, so the LinkLayer
is still ok.

Best Regards,
Markus


On 1/16/07, Klaus Darilion <klaus.mailinglists at pernau.at> wrote:
> Erik Forsen wrote:
> >
> > Did you find any solution to this problem? I have the exact same problem
> > with a Sangoma A102d card on debian 3.1, 2.6.19 and wanpipe 2.3.4-4.
> > I've followed several different guides, including the one on sangoma's
> > wiki. When I try to make a call out, I get this error:
> >
> > Jan 16 13:17:28] WARNING[18084]: app_dial.c:1081 dial_exec_full: Unable
> > to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion)
> >
> > Also got the same SABME errors as you do.
>
> Maybe you have link-layer problems - maybe you are using a wrong cable.
>
> You can test the card using a E1 cross-over cable between the 2 ports of
> the sangoma card.
>
> regards
> klaus
>
> --
> Klaus Darilion
> nic.at
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>