[asterisk-users] Fax Throughput

[Matthew Fredrickson]

Can you post your zaptel.conf so we can verify your timing settings?

---
Matthew Fredrickson
Software Engineer
Digium, Inc.

On Jun 25, 2007, at 11:10 PM, Don Kelly wrote:

> I've tried timing faxes two ways:
>
> From a fax machine on a station port of an AltiGen PC/PBX served by  
> an MCI
> PRI calling back into the same PRI and reaching a RightFax server on a
> station port behind the AltiGen.
>
> From the same fax machine on the same station port of the AltiGen  
> PC/PBX
> served by the same MCI PRI calling a number on an XO PRI connected  
> to an
> Asterisk system (Digium TE410P), dialing out on another channel on  
> the same
> PRI back into the MCI PRI and reaching the RightFax server on the  
> station
> port behind the AltiGen.
>
> extensions.conf includes:
> exten => 6122353002,1,dial(zap/g1/6122590773)
>
> Sending a one-page fax with moderate density (no graphics) takes  
> almost five
> minutes longer going through the Asterisk server.
>
> Any suggestions?
>
>   --Don
>
> Don Kelly
> PCF Corp
> Real Support for your Virtual Office
> 651 842-1000
> 888 Don Kell(y)
> 651 842-1001 fax
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users