[asterisk-users] Will the Sangoma A40003X fit in a 2950?

[Watkins, Bradley]

> I'll assume you mean a Dell PowerEdge 2950. Sangoma's web 
> site says the 
> cards dimensions are 55mm(H) x 290mm(L). A Full-Length PCI card is 
> 107mm(H) x 312mm(L). According to the "PowerEdge 2950 Getting Started 
> Guide" Page 10:
> 
> Left riser
>    PCI-X option: two full-height, full-length 3.3-V, 64-bit, 133-MHz
>                  (slots 2 and 3)
>                  OR
>    PCIe option:  one full-height x8 lane 3.3-V (slot 2) and one full-
>                  height x4 lane 3.3-V (slot 3)
> 
> Based on that, I'd wager that it will fit. You may need a molex power 
> connector available in the server though. Make sure you do 
> your research.

The 2950 has a molex connector for its optional internal tape drive.  If
you get a molex extension (at least 12"), then you will be able to make
it to the expansion slots.  I have done with with a Digium TDM2400 and a
PowerEdge 2950.
The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.