[asterisk-users] NTL Hangup

[Kyle Gordon]

On Friday 26 January 2007 23:40, Leo Ann Boon wrote:
> Kyle Gordon wrote:
> > fxsks=1 #X100P
>
> Is your line truly a kwelstart line? try fxsls
>
> > <SNIP>
> > busydetect=yes
>
> You may need to add these 2 values to help the busydetect
> busycount=3
> busypattern=375,375
>
> busypattern tells asterisk how your busy tone sounds like, in UK it
> should be 400Hz 0.375s ON and 0.375s OFF. The busycount tells asterisk
> how many consecutive cycles it must detect before dropping the line.
> You'll have to determine the best value for your setup, by trial and
> error. Too low - you might get premature hangup, too high - you'll have
> to wait for a long time for the line to hangup. A value of 3 will cause
> Asterisk to hang up in about 2.1s.
>
> > <SNIP>
> > switchtype=national
>
> This is not needed for analog lines.
>
> > signalling=fxs_ks
>
> Change to fxs_ls to match zaptel.conf
>

Hi Leo,

That appears to have done the trick. fxs_ls does seem to detect it hanging up 
more reliably. I don't know what the difference is, but it works :-)

If there's any change, I'll be sure to let you know :-p

Many thanks,

Kyle

-- 
Kyle Gordon
kyle at lodge.glasgownet.com
http://lodge.glasgownet.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070129/6bb5f5b3/attachment.pgp