[asterisk-users] NTL Hangup

[Tzafrir Cohen]

On Sat, Jan 27, 2007 at 07:40:31AM +0800, Leo Ann Boon wrote:
> Kyle Gordon wrote:
> >
> >fxsks=1 #X100P
> Is your line truly a kwelstart line? try fxsls

And if the line is ls, indeed, what harm is there in setting it up as
ks?

Consider, e.g.
http://svn.digium.com/svn/asterisk-gui/trunk/tools/zapscan.c

> ><SNIP>
> >busydetect=yes
> You may need to add these 2 values to help the busydetect
> busycount=3
> busypattern=375,375

this should have been progzone=uk , only it turns out that the UK
progzone actually sets it to 400.

I'd like to ask again: 
where are you using specific progzones and buzypatterns successfully?
Those magic values should be better documented.

> 
> busypattern tells asterisk how your busy tone sounds like, in UK it 
> should be 400Hz 0.375s ON and 0.375s OFF. The busycount tells asterisk 
> how many consecutive cycles it must detect before dropping the line. 
> You'll have to determine the best value for your setup, by trial and 
> error. Too low - you might get premature hangup, too high - you'll have 
> to wait for a long time for the line to hangup. A value of 3 will cause 
> Asterisk to hang up in about 2.1s.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir