[asterisk-users] Panasonic Hybrid Integration Advice Needed

[Scott Pinhorne]

True the Panasonic will need to be told to trunk a new extension range out
over the ISDN for the gateway to pickup but this seems a lots less hassle
and everything remains SIP.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C F
Sent: 24 January 2007 23:00
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Panasonic Hybrid Integration Advice Needed

I disagree on this, you will have to create a dialplan in the
panasonic to tell it when to go over the ISDN circuit.

On 1/24/07, Scott Pinhorne <scott at scottpinhorne.co.uk> wrote:
> If you use a Vegastream gateway on the actual incoming ISDN circuits then
> you won't even need to touch the Panasonic to integrate both systems.
>
> Regards
> Scott Pinhorne
> VoxIT Limited
>
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C F
> Sent: 24 January 2007 15:51
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Panasonic Hybrid Integration Advice Needed
>
> Which panasonic system?
> I'm assuming you are talking about the TDA line. If so get a IP
> Gateway card on the TDA system, that card uses h323, then configure it
> with asterisk as h323, or my favorite, get a PRI card on the TDA sysem
> (unless it's a TDA50 then the option is not available), and a T1 card
> on asterisk, and create a dialplan on the Panasonic that goes out over
> the PRI card.
>
> On 1/24/07, John French <jfrench at vividvoicedata.com> wrote:
> >
> >
> > I have a client who has a Panasonic Hybrid system.  They are taking in
> > another company as a building tenant and the tenant will be on a new 12
> > station Asterisk system.  This new asterisk system will have 4 FXO ports
> > plus ITSP.  The two systems will be separate except that they should tie
> > together for the purposes of dialing extensions directly on the opposite
> > phone system and for transferring calls.  I'm looking for advice on how
> best
> > to accomodate this.  Is it possible to do this via the Panasonic's IP
> > interface or will I need to cross connect them via T1 cards?  This is my
> > first integration as you can probably surmise.  Thanks in advance.
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users