[asterisk-users] Panasonic Hybrid Integration Advice Needed

[Richard Scobie]

C F wrote:
> Which panasonic system?
> I'm assuming you are talking about the TDA line. If so get a IP
> Gateway card on the TDA system, that card uses h323, then configure it
> with asterisk as h323, or my favorite, get a PRI card on the TDA sysem
> (unless it's a TDA50 then the option is not available), and a T1 card
> on asterisk, and create a dialplan on the Panasonic that goes out over
> the PRI card.

Speaking as one who has been using the 16 channel IP-GW card with a TDA 
100 for over a year, you might want to go with the PRI/T1 solution, 
although I have no experience with it.

Although H323 integration with Asterisk has been flawless, I have had no 
luck with any form of out of band DTMF transport through the IP-GW.

The documentation for the card states that it can do it, but does not 
state what protocol is used and packet captures show no sign of it.

If anyone knows anything more, I would like to find out, as the local 
Panasonic agents have not been much help.

Regards,

Richard