[asterisk-users] Asterisk + Unicall + Telmex E1 MFC/R2 Argentina + Meridian

[Facundo Ameal]

Thanks Moises, I was trying to find some consistence, but the only
similarity I could find is that much of the calls that fail are long
distance ones or international. It fails in both, Telmex and Meridian
link.
I 'll try looping.

I'll be posting results soon. I hope I can manage to get it work.

Thanks for your help.

Regards.

On 1/19/07, Moises Silva <moises.silva at gmail.com> wrote:
> Similar probles I had were fixed incrementing one of the timers, but
> if you have already done that, I have no idea of your problem, you
> require to debug the problem and try to find some consistence in the
> failures, find if the failure is on the Asterisk -> telco Link, or in
> the Asterisk -> meridian link? find if putting in loop your own
> asterisk still fails, etc etc.
>
> Kind Regards
>
> On 1/18/07, Facundo Ameal <fameal at gmail.com> wrote:
> > Thanks for your help, but I've already adjusted timers on the source
> > code. I found your document a week ago and read it.
> > Do you really think that is a matter of timers only?
> >
> > Greets!
> >
> > On 1/18/07, Moises Silva <moises.silva at gmail.com> wrote:
> > > Sometimes timers need to be adjusted on the mfcr2 source code.
> > > Sometimes is missconfiguration. Anyway, may be this document can help
> > > you out to debug the problem:
> > >
> > > http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english.pdf
> > >
> > > Kind Regards
> > >
> > > On 1/17/07, Facundo Ameal <fameal at gmail.com> wrote:
> > > > Hi everyone!
> > > > I'm having some issue trying to place calls with asterisk connected to
> > > > an E1 R2 from Telmex Argentina. The other E1 port is connected to a
> > > > Meridian which also uses R2 protocol. Calls sometimes fail with
> > > > different error messages such as: Unicall protocol error 32773, 32772,
> > > > 32769. Some other calls fail saying:
> > > >                            Far end disconnected(cause=Destination out
> > > > of order [27])
> > > >                            Far end disconnected(cause=User alerting,
> > > > no answer [19])
> > > >                            Far end disconnected(cause=Switching
> > > > equipment congestion [42])
> > > >                            Far end disconnected(cause=User busy [17])
> > > >
> > > > I don't think those causes are real, because if you use another line,
> > > > yo establish the call. Could it be something about timing of ABCD
> > > > bits?
> > > >
> > > > I'm using:
> > > > Asterisk 1.2.6
> > > > Zaptel 1.2.5
> > > > libmfcr2 0.0.3
> > > > libunicall 0.0.3
> > > > libsupertone 0.0.2
> > > > spandsp-0.0.3
> > > >
> > > > And this is my unicall.conf:
> > > >
> > > > [channels]
> > > > loglevel=1023
> > > > usecallerid=yes
> > > > hidecallerid=no
> > > > callwaitingcallerid=yes
> > > > threewaycalling=yes
> > > > transfer=yes
> > > > cancallforward=yes
> > > > callerid=asreceived
> > > > callreturn=yes
> > > > echocancel=no
> > > > echocancelwhenbridged=no
> > > > echotraining=no
> > > > rxgain=0.0
> > > > txgain=0.0
> > > > callgroup=1
> > > > pickupgroup=1
> > > > immediate=no
> > > >
> > > > musiconhold=default
> > > > protocolclass=mfcr2
> > > > protocolvariant=ar,10,4,15
> > > > protocolend=cpe
> > > > group=1
> > > > context=from-zaptel
> > > > channel => 1-15
> > > > channel => 17-29
> > > >
> > > > loglevel=0
> > > > usecallerid=yes
> > > > hidecallerid=no
> > > > callwaitingcallerid=yes
> > > > threewaycalling=yes
> > > > transfer=yes
> > > > cancallforward=yes
> > > > callerid=asreceived
> > > > callreturn=yes
> > > > echocancel=yes
> > > > echocancelwhenbridged=yes
> > > > echotraining=yes
> > > > rxgain=0.0
> > > > txgain=0.0
> > > > callgroup=1
> > > > pickupgroup=1
> > > > immediate=no
> > > >
> > > > protocolclass=mfcr2
> > > > protocolvariant=ar,0,12,12
> > > > protocolend=cpe
> > > > group=2
> > > > context=hacia-afuera
> > > > channel => 32-46
> > > > channel => 48-60
> > > >
> > > >
> > > > Thanks in advance!
> > > >
> > > > Greets!
> > > >
> > > >
> > > >
> > > > --
> > > > Facundo Ameal.
> > > > fameal<at>gmail<dot>com
> > > > Linux User #395088
> > > >
> > > > Share your knowledge, use free software.
> > > > _______________________________________________
> > > > --Bandwidth and Colocation provided by Easynews.com --
> > > >
> > > > asterisk-users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > >
> > >
> > > --
> > > "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> > --
> > Facundo Ameal.
> > fameal<at>gmail<dot>com
> > Linux User #395088
> >
> > Share your knowledge, use free software.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
> "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Facundo Ameal.
fameal<at>gmail<dot>com
Linux User #395088

Share your knowledge, use free software.