[asterisk-users] sangoma a102d + Asterisk 1.2.14 ... bridging together 2 call legs on same PRI?

[Melcon Moraes]

Looks like your trying to make both calls using the same channel. Try
using Zap/g1/<number> do dial since 'g' will take the first available
channel in the group 1(assuming your pri is setup as group=1 in
zapata.conf)

[]'s
MM


 -----Original Message-----
From:   "Scott Keagy" <skeagy at ipcexperts.com>
To:     "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Cc:     
Sent:  Thu, 18 Jan 2007 02:45:44 -0500
Delivered:  Thu,  18 Jan 2007 03:53:08 
Subject:[asterisk-users] sangoma a102d + Asterisk 1.2.14 ... bridging together 2 call legs on same PRI?

Hi all,

 

Are there any issues to be concerned about when calls come in from PSTN
to a PRI card and are forwarded back out the same PRI card? Anything
different have to be enabled in zaptel.conf or zapata.conf or the
Sangoma  configs to make this work? What about using .call files that
join two ZAP channels?

 

Channel: ZAP/1/4081234567

MaxRetries: 0

RetryTime: 60

WaitTime: 60

Application: Dial

Data: ZAP/1/4083456789

 


E-mail classificado pelo Identificador de Spam Inteligente Terra.
Para alterar a categoria classificada, visite
http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1169106788.688032.8662.alcuta.terra.com.br,7359,Des15,Des15


 --Original Message Ends--

-- 
Melcon Moraes <melcon.moraes at terra.com.br>