[asterisk-users] RE : TDM2400p bad sound quality
Jay Wilton
asteriskcr at yahoo.com
Sun Jan 14 22:20:58 MST 2007
--- Gordon Henderson <gordon+asterisk at drogon.net> wrote:
> On Sun, 14 Jan 2007, Giuffredi wrote:
>
> > I tried the card alone so I don't think is an IRQ
> problem (anyway is
> > there a way to be sure?)
>
> You can make sure the card is sitting on it's own IRQ -
> use the command
>
> cat /proc/interrupts
>
> to check. Eg. on one of my boxes with a TDM400P:
>
> CPU0
> 0: 1231472788 XT-PIC timer
> 2: 0 XT-PIC cascade
> 5: 0 XT-PIC uhci_hcd:usb1,
> uhci_hcd:usb2
> 7: 1 XT-PIC acpi
> 8: 4 XT-PIC rtc
> 11: 3101088 XT-PIC eth0
> 12: 1231265328 XT-PIC wctdm
> 14: 43803 XT-PIC ide0
> 15: 66249 XT-PIC ide1
> NMI: 0
> LOC: 0
> ERR: 0
> MIS: 0
>
> This isn't foolproof, but it's a good start.
>
> (and I don't know of the wctdm module is the same on the
> TDM2400P card
> though)
>
> You can also check that the card isn't losing interrupts
> by running the
> zttest proram:
>
> /sbin/zttest
>
> wait a few moments then kill it with Control-C - Eg.
>
> --- Results after 46 passes ---
> Best: 100.000000 -- Worst: 99.987793 -- Average:
> 99.993896
>
>
> There's more on interrupts here:
>
>
>
http://www.voip-info.org/wiki/view/Asterisk+PCI+bus+Troubleshooting
>
> It's aimes at the TDM400P card, but I'd be surprised if
> the 2400P is that
> much different (but someone please correct me if it is!)
>
> Gordon
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
remove the hardware echo can and setup software can.
honest abe
____________________________________________________________________________________
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html
More information about the asterisk-users
mailing list