[asterisk-users] Sangoma A102 w/ EC module gets intermittent echo/audio artifacts

Colin Anderson ColinA at landmarkmasterbuilder.com
Wed Jan 3 10:11:53 MST 2007


I think you are absolutely right. The audio I heard earlier sounds exactly
like a timing issue. So:

wanpipe1.conf:

TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0

wanpipe2.conf:

TE_CLOCK        = MASTER
TE_REF_CLOCK    = 1

zaptel.conf:

span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs

I'm going to make this change and reload at lunchtime, I'll document it and
post it to the list if it works. thanks for the good eye. 



-----Original Message-----
From: Michael L. Young [mailto:myoung at acsacc.com]
Sent: Wednesday, January 03, 2007 9:37 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Sangoma A102 w/ EC module gets
intermittent echo/audio artifacts


< Zaptel.conf:

< loadzone = us
< span=1,1,0,esf,b8zs
< span=2,1,0,esf,b8zs
< bchan=1-23
< dchan=24
< bchan=25-47
< dchan=48

Just a quick thought in looking at the settings above, it appears that you
have set both spans as the primary timing source.  I am pretty sure that
only one span should be the primary timing source.  The other span should
either be at 0 (not used as a timing source) or set as a secondary timing
source.

Hope this helps.

Michael L. Young

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


More information about the asterisk-users mailing list