[asterisk-users] Help Needed: Can't make "local" calls on a brandnew PRI

[Zack Odell]

On Wed, 28 Feb 2007 19:13:55 -0500, Mark Engelhardt <marke at intuitiveengineering.com> wrote:
> Hello,
> 
> I just installed a PRI and when I make a local (seven digit) call, I
> get Code 28 back from the telco, (I believe code 28 means "Invalid
> Number") and I hear a fast busy on the phone.
> 
> Here is the output:
>      -- Executing Dial("SIP/marke-17b1", "ZAP/G1/4967171") in new stack
>      -- Requested transfer capability: 0x00 - SPEECH
>      -- Called G1/4967171
>      -- Zap/23-1 is proceeding passing it to SIP/marke-17b1
>      -- PROGRESS with cause code 28 received
>      -- Zap/23-1 is making progress passing it to SIP/marke-17b1
> 
> As you can see, asterisk is reporting 4967171 as the dialed number
> (which is valid)
> 
> When I dial long distance, everything works fine.
> 
> Here is the output from long distance...
> 
>      -- Executing Set("SIP/marke-80f8", "CALLERID(all)=Small Dog
> Electronics<8005116277>") in new stack
>      -- Executing Dial("SIP/marke-80f8", "ZAP/G1/17077510895") in new
> stack
>      -- Requested transfer capability: 0x00 - SPEECH
>      -- Called G1/17077510895
>      -- Zap/23-1 is proceeding passing it to SIP/marke-80f8
>      -- Zap/23-1 is ringing
> 
> If I just send the full 18024967171 to the telco, I get a voice from
> the telco saying it is not necessary to dial 1 or the area code when
> calling this number.
> 
> So the questions:  Is there anyway to further verify that asterisk is
> not sending any extra digits or filler digits to the telco on the PRI?
> If the problem is not in asterisk or zaptel, what do I say to the
> Telco to get them to believe the problem is on their end?
> 
> We are running:
> Asterisk 1.2.6
> Zaptel 1.2.14
> TE110P Card
> 
> Mark Engelhardt
> 
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


What are the contents of extensions.conf?