[asterisk-users] No Caller ID Name PRI NI2
foucaulom at infofortin.com
foucaulom at infofortin.com
Wed Feb 28 16:23:57 MST 2007
Hi,
You're right about what Telus said, this is written in the form that I
received to get one but the tech at Group Telecom just respond to me in
and say that this is supposed to work with NI2 with that structure:
I 1C Standard Facility Length = 21
9F Serv Discrim Networking Extensions
PDU Component Begins (hex)
8B0100A10F020101...
Also, in that post
http://lists.digium.com/pipermail/asterisk-users/2004-December/071501.html
The guy seem to say that caller id name is working with NI-2....
When I was in line with the tech of GT, I have also tried with 5ess and
it wasn't working (sorry, no trace)
Can you just past the url of your post about Telus?
Thank you,
LF
Quoting "Webster, Andrew" <awebster at connectalk.com>:
>
> Hi,
>
> I'm having a similar problem, but the name isn't even appearing in debug
> output of PRI (see my other post about this). My PRI is with Telus, and
> they told me that NI-2 doesn't support CallerID name function, only
> NI-1.
>
>
> Andrew
>
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>> bounces at lists.digium.com] On Behalf Of foucaulom at infofortin.com
>> Sent: Wednesday, February 28, 2007 17:03
>> To: asterisk-users at lists.digium.com
>> Subject: [asterisk-users] No Caller ID Name PRI NI2
>>
>> I there,
>>
>> I have some trouble to do working caller id name for outgoing calls on
>> the PRI we just installed. Caller id name work on incoming calls only.
>> Caller id number work on incoming and outgoing calls.
>>
>>
>> The provider, Goup Telecom, said that's in what i'm sending. They said
>> that I send the cid name in ascii code and to do it working, I need to
>> send it in hex.
>>
>> So I take some traces but i'm unable to figure where is the problem.
>>
>> What I see In case that work: incoming call:
>> < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f
> 52
>> 54 49 4e 20 46 41 58]
>> < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
>> 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
>> PROTOCOL 1F
>>
>> What I see in case that doesn't work: outgoing call:
>> > [28 05 b1 69 6e 66 6f]
>> > Display (len= 5) Charset: 31 [ info ]........
>>
>>
>> completes traces:
>>
>> working:
>> < [ 02 01 da d6 08 02 02 34 05 04 03 80 90 a2 18 03 a9 83 81 1c 1c 9f
>> 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 54 49 4e
> 20
>> 46 41 58 1e 02 82 83 6c 0c 21 83 38 31 39 37 38 30 31 32 37 33 70 0b
> a1
>> 38 31 39 33 34 30 30 39 37 37 ]
>> < Informational frame:
>> < SAPI: 00 C/R: 1 EA: 0
>> < TEI: 000 EA: 1
>> < N(S): 109 0: 0
>> < N(R): 107 P: 0
>> < 76 bytes of data
>> -- ACKing all packets from 106 to (but not including) 107
>> -- Since there was nothing left, stopping T200 counter
>> -- Stopping T203 counter since we got an ACK
>> -- Nothing left, starting T203 counter
>> < Protocol Discriminator: Q.931 (8) len=76
>> < Call Ref: len= 2 (reference 564/0x234) (Originator)
>> < Message type: SETUP (5)
>> < [04 03 80 90 a2]
>> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
>> capability: Speech (0)
>> < Ext: 1 Trans mode/rate: 64kbps,
>> circuit-mode (16)
>> < Ext: 1 User information layer 1: u-Law
>> (34)
>> < [18 03 a9 83 81]
>> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
>> Exclusive Dchan: 0
>> < ChanSel: Reserved
>> < Ext: 1 Coding: 0 Number Specified Channel
> Type:
>> 3
>> < Ext: 1 Channel: 1 ]
>> < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f
> 52
>> 54 49 4e 20 46 41 58]
>> < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
>> 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
>> PROTOCOL 1F
>> 8B 0001 00 (CONTEXT SPECIFIC [11])
>> A1 0016 (CONTEXT SPECIFIC [1])
>> 02 0001 01 (INTEGER: 1)
>> 02 0001 00 (INTEGER: 0)
>> 80 000E 49 4E 46 4F 46 4F 52 54 49 4E 20 46 41 58 (CONTEXT SPECIFIC
> [0])
>> < [1e 02 82 83]
>> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
>> (0) 0: 0 Location: Public network serving the local user (2)
>> < Ext: 1 Progress Description: Calling
>> equipment is non-ISDN. (3) ]
>> < [6c 0c 21 83 38 31 39 37 38 30 31 32 37 33]
>> < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
>> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>> < Presentation: Presentation allowed of
>> network provided number (3) '8197801273' ]
>> < [70 0b a1 38 31 39 33 34 30 30 39 37 37]
>> < Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
>> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8193400977' ]
>> -- Making new call for cr 564
>> -- Processing Q.931 Call Setup
>> -- Processing IE 4 (cs0, Bearer Capability)
>> -- Processing IE 24 (cs0, Channel Identification)
>> -- Processing IE 28 (cs0, Facility)
>> Q.932 Interpretation component is not handled
>> Handle Q.932 ROSE Invoke component
>> [ Handling operation 0 ]
>> Handle Name display operation
>> Received caller name 'INFOFORTIN FAX'
>> -- Processing IE 30 (cs0, Progress Indicator)
>> -- Processing IE 108 (cs0, Calling Party Number)
>> -- Processing IE 112 (cs0, Called Party Number)
>> q931.c:3294 q931_receive: call 564 on channel 1 enters state 6 (Call
>> Present)
>> Sending Receiver Ready (110)
>> > [ 02 01 01 dc ]
>> > Supervisory frame:
>> > SAPI: 00 C/R: 1 EA: 0
>> > TEI: 000 EA: 1
>> > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
>> > N(R): 110 P/F: 0
>> > 0 bytes of data
>> -- Restarting T203 counter
>> -- Restarting T203 counter
>> q931.c:2570 q931_call_proceeding: call 564 on channel 1 enters state 9
>> (Incoming Call Proceeding)
>> > [ 00 01 d6 dc 08 02 82 34 02 18 03 a9 83 81 ]
>> > Informational frame:
>> > SAPI: 00 C/R: 0 EA: 0
>> > TEI: 000 EA: 1
>> > N(S): 107 0: 0
>> > N(R): 110 P: 0
>> > 10 bytes of data
>> -- Restarting T203 counter
>> Stopping T_203 timer
>> Starting T_200 timer
>> > Protocol Discriminator: Q.931 (8) len=10
>> > Call Ref: len= 2 (reference 564/0x234) (Terminator)
>> > Message type: CALL PROCEEDING (2)
>> > [18 03 a9 83 81]
>>
>>
>>
>> don't working:
>>
>> -- Restarting T203 counter
>> Stopping T_203 timer
>> Starting T_200 timer
>> > Protocol Discriminator: Q.931 (8) len=54
>> > Call Ref: len= 2 (reference 13/0xD) (Originator)
>> > Message type: SETUP (5)
>> > [04 03 80 90 a2]
>> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
>> > capability: Speech (0)
>> > Ext: 1 Trans mode/rate: 64kbps,
>> > circuit-mode (16)
>> > Ext: 1 User information layer 1: u-Law
>> (34)
>> > [18 03 a9 83 81]
>> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
>> > Exclusive Dchan: 0
>> > ChanSel: Reserved
>> > Ext: 1 Coding: 0 Number Specified Channel
> Type:
>> 3
>> > Ext: 1 Channel: 1 ]
>> > [1e 02 80 83]
>> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
>> > (0) 0: 0 Location: User (0)
>> > Ext: 1 Progress Description: Calling
>> > equipment is non-ISDN. (3) ]
>> > [28 05 b1 69 6e 66 6f]
>> > Display (len= 5) Charset: 31 [ info ]
>> > [6c 0d 21 80 31 38 31 39 33 34 30 33 31 32 38]
>> > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
>> > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>> > Presentation: Presentation permitted, user
>> > number not screened (0) '18193403128' ]
>> > [70 0b a1 38 31 39 35 37 33 30 39 31 33]
>> > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
>> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8195730913' ]
>> q931.c:2879 q931_setup: call 32781 on channel 1 enters state 1 (Call
>> Initiated)
>>
>>
>> Anyone had suggestion/comment welcome.
>>
>> Thank you ad advance,
>>
>> Loic
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
More information about the asterisk-users
mailing list