[asterisk-users] No Caller ID Name PRI NI2
Webster, Andrew
awebster at connectalk.com
Wed Feb 28 15:36:22 MST 2007
Hi,
I'm having a similar problem, but the name isn't even appearing in debug
output of PRI (see my other post about this). My PRI is with Telus, and
they told me that NI-2 doesn't support CallerID name function, only
NI-1.
Andrew
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of foucaulom at infofortin.com
> Sent: Wednesday, February 28, 2007 17:03
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] No Caller ID Name PRI NI2
>
> I there,
>
> I have some trouble to do working caller id name for outgoing calls on
> the PRI we just installed. Caller id name work on incoming calls only.
> Caller id number work on incoming and outgoing calls.
>
>
> The provider, Goup Telecom, said that's in what i'm sending. They said
> that I send the cid name in ascii code and to do it working, I need to
> send it in hex.
>
> So I take some traces but i'm unable to figure where is the problem.
>
> What I see In case that work: incoming call:
> < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f
52
> 54 49 4e 20 46 41 58]
> < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
> 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
> PROTOCOL 1F
>
> What I see in case that doesn't work: outgoing call:
> > [28 05 b1 69 6e 66 6f]
> > Display (len= 5) Charset: 31 [ info ]........
>
>
> completes traces:
>
> working:
> < [ 02 01 da d6 08 02 02 34 05 04 03 80 90 a2 18 03 a9 83 81 1c 1c 9f
> 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 54 49 4e
20
> 46 41 58 1e 02 82 83 6c 0c 21 83 38 31 39 37 38 30 31 32 37 33 70 0b
a1
> 38 31 39 33 34 30 30 39 37 37 ]
> < Informational frame:
> < SAPI: 00 C/R: 1 EA: 0
> < TEI: 000 EA: 1
> < N(S): 109 0: 0
> < N(R): 107 P: 0
> < 76 bytes of data
> -- ACKing all packets from 106 to (but not including) 107
> -- Since there was nothing left, stopping T200 counter
> -- Stopping T203 counter since we got an ACK
> -- Nothing left, starting T203 counter
> < Protocol Discriminator: Q.931 (8) len=76
> < Call Ref: len= 2 (reference 564/0x234) (Originator)
> < Message type: SETUP (5)
> < [04 03 80 90 a2]
> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> < Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> < Ext: 1 User information layer 1: u-Law
> (34)
> < [18 03 a9 83 81]
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified Channel
Type:
> 3
> < Ext: 1 Channel: 1 ]
> < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f
52
> 54 49 4e 20 46 41 58]
> < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
> 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
> PROTOCOL 1F
> 8B 0001 00 (CONTEXT SPECIFIC [11])
> A1 0016 (CONTEXT SPECIFIC [1])
> 02 0001 01 (INTEGER: 1)
> 02 0001 00 (INTEGER: 0)
> 80 000E 49 4E 46 4F 46 4F 52 54 49 4E 20 46 41 58 (CONTEXT SPECIFIC
[0])
> < [1e 02 82 83]
> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> (0) 0: 0 Location: Public network serving the local user (2)
> < Ext: 1 Progress Description: Calling
> equipment is non-ISDN. (3) ]
> < [6c 0c 21 83 38 31 39 37 38 30 31 32 37 33]
> < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> < Presentation: Presentation allowed of
> network provided number (3) '8197801273' ]
> < [70 0b a1 38 31 39 33 34 30 30 39 37 37]
> < Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8193400977' ]
> -- Making new call for cr 564
> -- Processing Q.931 Call Setup
> -- Processing IE 4 (cs0, Bearer Capability)
> -- Processing IE 24 (cs0, Channel Identification)
> -- Processing IE 28 (cs0, Facility)
> Q.932 Interpretation component is not handled
> Handle Q.932 ROSE Invoke component
> [ Handling operation 0 ]
> Handle Name display operation
> Received caller name 'INFOFORTIN FAX'
> -- Processing IE 30 (cs0, Progress Indicator)
> -- Processing IE 108 (cs0, Calling Party Number)
> -- Processing IE 112 (cs0, Called Party Number)
> q931.c:3294 q931_receive: call 564 on channel 1 enters state 6 (Call
> Present)
> Sending Receiver Ready (110)
> > [ 02 01 01 dc ]
> > Supervisory frame:
> > SAPI: 00 C/R: 1 EA: 0
> > TEI: 000 EA: 1
> > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> > N(R): 110 P/F: 0
> > 0 bytes of data
> -- Restarting T203 counter
> -- Restarting T203 counter
> q931.c:2570 q931_call_proceeding: call 564 on channel 1 enters state 9
> (Incoming Call Proceeding)
> > [ 00 01 d6 dc 08 02 82 34 02 18 03 a9 83 81 ]
> > Informational frame:
> > SAPI: 00 C/R: 0 EA: 0
> > TEI: 000 EA: 1
> > N(S): 107 0: 0
> > N(R): 110 P: 0
> > 10 bytes of data
> -- Restarting T203 counter
> Stopping T_203 timer
> Starting T_200 timer
> > Protocol Discriminator: Q.931 (8) len=10
> > Call Ref: len= 2 (reference 564/0x234) (Terminator)
> > Message type: CALL PROCEEDING (2)
> > [18 03 a9 83 81]
>
>
>
> don't working:
>
> -- Restarting T203 counter
> Stopping T_203 timer
> Starting T_200 timer
> > Protocol Discriminator: Q.931 (8) len=54
> > Call Ref: len= 2 (reference 13/0xD) (Originator)
> > Message type: SETUP (5)
> > [04 03 80 90 a2]
> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> > capability: Speech (0)
> > Ext: 1 Trans mode/rate: 64kbps,
> > circuit-mode (16)
> > Ext: 1 User information layer 1: u-Law
> (34)
> > [18 03 a9 83 81]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> > Exclusive Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel
Type:
> 3
> > Ext: 1 Channel: 1 ]
> > [1e 02 80 83]
> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> > (0) 0: 0 Location: User (0)
> > Ext: 1 Progress Description: Calling
> > equipment is non-ISDN. (3) ]
> > [28 05 b1 69 6e 66 6f]
> > Display (len= 5) Charset: 31 [ info ]
> > [6c 0d 21 80 31 38 31 39 33 34 30 33 31 32 38]
> > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > Presentation: Presentation permitted, user
> > number not screened (0) '18193403128' ]
> > [70 0b a1 38 31 39 35 37 33 30 39 31 33]
> > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8195730913' ]
> q931.c:2879 q931_setup: call 32781 on channel 1 enters state 1 (Call
> Initiated)
>
>
> Anyone had suggestion/comment welcome.
>
> Thank you ad advance,
>
> Loic
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list