[asterisk-users] Re: FXS - Init Indirect Registers UNSUCCESSFULLY.

Chris Earle cearle at cbltech.ca
Thu Feb 22 08:32:20 MST 2007


ahh! I am having this same problem all of a sudden

I've installed many TDM cards before ..never had this problem

what gives?

Trying to load zaptel 1.0.10  ...

Rev. G card ... tried uncommenting the revH fix in zconfig.h ...but no go

ideas?!

--
Chris



"Michael C. Cambria" <mcc at fid4.com> wrote in message
news:45BBB67E.1000902 at fid4.com...
>
> I'm having problems with a TDM22B.  The FXO modules work fine.  Both FXS
> modules fail to initialized.
>
> The error messages I seeR when the module loads:
>
> Init Indirect Registers UNSUCCESSFULLY.
> Indirect Registers failed verification.
>
> I already RMA'ed a TDM22B because of this problem.  Now that the
> replacement shows a similar issue, I want to see if anyone else can
> think of something to try; at least until Monday when I can get an RMA
> number for this card.
>
> If it helps, I have a TDM20B (just FXS modules) that does not see this
> problem when I place it in the same slot.
>
>
> Here is what dmesg shows for the TDM22B when the system boots, or when I
> issues modprobe wctdm:
>
> Freshmaker version: 73
> Freshmaker passed register test
> !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
> !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
> !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
> !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
> !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
> !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
> !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
> !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
> !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
> !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
> !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
> !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
> !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
> !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
> !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
> !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
> !!!!! Init Indirect Registers UNSUCCESSFULLY.
> Indirect Registers failed verification.
> !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
> !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
> !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
> !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
> !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
> !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
> !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
> !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
> !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
> !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
> !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
> !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
> !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
> !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
> !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
> !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
> !!!!! Init Indirect Registers UNSUCCESSFULLY.
> Indirect Registers failed verification.
> Module 0: FAILED FXS (FCC)
> !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
> !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
> !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
> !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
> !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
> !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
> !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
> !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
> !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
> !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
> !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
> !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
> !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
> !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
> !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
> !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
> !!!!! Init Indirect Registers UNSUCCESSFULLY.
> Indirect Registers failed verification.
> !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
> !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
> !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
> !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
> !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
> !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
> !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
> !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
> !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
> !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
> !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
> !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
> !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
> !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
> !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
> !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
> !!!!! Init Indirect Registers UNSUCCESSFULLY.
> Indirect Registers failed verification.
> Module 1: FAILED FXS (FCC)
> Module 2: Installed -- AUTO FXO (FCC mode)
> Module 3: Installed -- AUTO FXO (FCC mode)
> Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules)
>
>
> Thanks,
> MikeC
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>





More information about the asterisk-users mailing list