[asterisk-users] DNIS on T1 channels

[Matt]

I don't totally understand your question.

* Your T1 is providing DNIS.
* You are receiving the DNIS
* Add a line to your from-pstn, from-trunk, or whatever from your T1 is
called that when it sees those 5 digits you want it runs the AGI.


On 2/16/07, David Ruggles <david at safedatausa.com> wrote:
>
> I installed a Sangoma card with the default install. I'm getting five
> digits
> of DNIS with each call. The T1 is setup ESF/B8ZS wink start. Each of the
> digits of the DNIS are being used for extensions in the context. I need a
> single extension that let me start an AGI script that can use the dnis.
>
> Can anyone point me in the right direction to do this?
>
> Thanks,
>
> David Ruggles
> CCNA MCSE (NT) CNA A+
> Network Engineer        Safe Data, Inc.
> (910) 285-7200  david at safedatausa.com
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070216/bc984ac9/attachment.htm