[asterisk-users] Digium TE110P

[demuel at thephinix.org]

Again, you need a E1/T1 link for that card and you need to set out the jumper either for T1 or E1
link. Since you are in Europe, the jumper settings should be for E1.

This card is different from the TDM400P family.

Regards,
Demuel

> Hi Demuel
>
> Thanks, it definitely helps a lot.
>
> I forgot to mention that I worked out the jumper thing.
>
> So, you give the explanation that is : as there is no E1/T1
> connected to the card, the card is somewhat saying that it is
> waiting for a link.
>
> In this regard, it behaves differently from an analogic one,
> like the TDM400P, which shows a constant green light as soon
> as the driver is being loaded, even if there is no analogic
> link connected to the card. I was expecting the same behaviour
> from the TE110P.
>
> Thanks again,
>
> Olivier
>
> Envoyez vos cartes de voeux depuis www.laposte.net
> Elles seront ensuite distribuées par le facteur : pratique et malin !
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>