[asterisk-users] genzaptool from "xorcom"

[younss azzayani]

ok thank you Cohen thank you very much

2007/2/14, Tzafrir Cohen <tzafrir.cohen at xorcom.com>:
> On Wed, Feb 14, 2007 at 03:44:25PM +0000, younss azzayani wrote:
> > Thank You Cohen
> >
> > What card do you have?
> > *****************
> > Digium TE110P & TDM400P, think the problem is with TE110P (configured
> > as span 2) because i remark that the dchannel=20
> > *********************
> > What is th output of: cat /proc/zaptel/*
> > *************************
> > Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> >
> >           1 WCTDM/0/0 FXSKS
> >           2 WCTDM/0/1 FXSKS
> >           3 WCTDM/0/2 FXSKS
> >           4 WCTDM/0/3 FXSKS
> > Span 2: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS
> >
> >           5 WCT1/0/1 Clear
> >           6 WCT1/0/2 Clear
> >           7 WCT1/0/3 Clear
> >           8 WCT1/0/4 Clear
> >           9 WCT1/0/5 Clear
> >          10 WCT1/0/6 Clear
> >          11 WCT1/0/7 Clear
> >          12 WCT1/0/8 Clear
> >          13 WCT1/0/9 Clear
> >          14 WCT1/0/10 Clear
> >          15 WCT1/0/11 Clear
> >          16 WCT1/0/12 Clear
> >          17 WCT1/0/13 Clear
> >          18 WCT1/0/14 Clear
> >          19 WCT1/0/15 Clear
> >         13 WCT1/0/9 Clear
> >          14 WCT1/0/10 Clear
> >          15 WCT1/0/11 Clear
> >          16 WCT1/0/12 Clear
> >          17 WCT1/0/13 Clear
> >          18 WCT1/0/14 Clear
> >          19 WCT1/0/15 Clear
> >          20 WCT1/0/16
>
> This is the D channel, right? Is the connection a E1 PRI?
>
> >          21 WCT1/0/17
> >          22 WCT1/0/18
> >          23 WCT1/0/19
> >          24 WCT1/0/20
> >          25 WCT1/0/21
> >          26 WCT1/0/22
> >          27 WCT1/0/23
> >          28 WCT1/0/24
> >          29 WCT1/0/25
> >          30 WCT1/0/26
> >          31 WCT1/0/27
> >          32 WCT1/0/28
> >          33 WCT1/0/29
> >          34 WCT1/0/30
> >          35 WCT1/0/31
>
> 31 channels, as expected.
>
>
> > ********************************
> >
> > What is the generated /etc/zaptel.conf ?
> > ******************************
> > # Autogenerated by ./genzaptelconf -- do not hand edit
> > # Zaptel Configuration File
> > #
> > # This file is parsed by the Zaptel Configurator, ztcfg
> > #
> >
> > # It must be in the module loading order
> >
> >
> > # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> > fxsks=1
> > fxsks=2
> > fxsks=3
> > fxsks=4
> >
> > # Span 2: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS
> > span=2,1,1,ccs,hdb3
> > bchan=5-19,21-35
> > dchan=20
> >
> > # Global data
> >
> > loadzone        = us
> > defaultzone     = us
>
> The error you get is from a place in ztcfg's code that applies some
> sanity checks to the signalling it sends to channel no. 16 of a span. If
> they are not met, that channel cannot be considered a D channel.
>
> I didn't understand those conditions exactly. In one specific case were
> I helped someone on #asterisk that guy eventually removed the sanity
> check from ztcfg and moved on.
>
> Whether or not this is a wise thing to do, I don't know.
>
> --
>                Tzafrir Cohen
> icq#16849755                    jabber:tzafrir at jabber.org
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>