[asterisk-users] Cisco Router for supply a connection from PABX to Asterisk

[Pavel Jezek]

some howto configuration for asterisk controlling ci$co router (pri/qsig 
ports especially) using mgcp interests me too... ;-)




Yehavi Bourvine +972-8-9489444 wrote
>> I am using a Cisco to connect Asterisk via PRI to our Nortel TX-1. The Cisco is
>> a "voice bundle" of 2,811 + E1 + PDLM card. Note that you need PDLMs as the
>> same number as the PRI channels you are going to define (i.e. 32 PDLMs for each
>> PRI).
>>
>> I am controlling the Cisco via SIP; it works, but a few problems:
>>
>> - Only basic connectivity. No additional features (like names) as the Cisco
>>   supports them only via MGCP (in MGCP is passes all the Q.sig signals to the
>>   PBX - Asterisk in this case - and it should do all the handling, but
>>   I did not find how to do it with Asterisk).
>>
>>
>>