[asterisk-users] ISDN BRI support with HFC-PCI cards?

[Jaap Winius]

Quoting Tzafrir Cohen <tzafrir.cohen at xorcom.com>:

>> > cat /proc/zaptel/*
>>
>> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED   
>> (F4)" AMI/CCS
>>
>>             1 ZTHFC1/0/1 Clear (In use)
>>             2 ZTHFC1/0/2 Clear (In use)
>>             3 ZTHFC1/0/3 HDLCFCS (In use)
>> Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [TE] layer 1 ACTIVATED (F7)" AMI/CCS
>>
>>             4 ZTHFC2/0/1 Clear (In use)
>>             5 ZTHFC2/0/2 Clear (In use)
>>             6 ZTHFC2/0/3 HDLCFCS (In use)
>
> Looks like it's already configured and used by Asterisk.

Indeed. It would appear that Asterisk now recognizes these cards. Of  
course, I now have another set of problems, but I'll ask about those  
in a new thread.

> However, I believe that the ports are disconnected, right?

Physically? One had a cable in it, the other one didn't.

Cheers,

Jaap