[asterisk-users] X100P Fxo card headaches

[Tzafrir Cohen]

On Tue, Dec 11, 2007 at 10:09:34AM +0000, Chris Boczko wrote:
> Hello List,
> 
> Im just dipping my feet into the asterisk world, and im having major
> fxo problems
> 
> Im running Asterisk (from svn) + libpri (from svn) + 

You don't really need libpri, as you have a simple analog card. Actually
it only serves to confuse you later on...

> asterisk-addons
> (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a
> Debian Etch box, with 1gb ram, running all of the services for my home
> server (web / db / music server etc), and i would like to run my PSTN
> line from Kingston Comms, but i can't get this box the recoginsie this
> line!
> 
> The X100p is a cheap clone i got off ebay for a tenner, so im not
> expecting much, i know they have echo issues, but im going to upgrade
> to a SPA3012 / TDM400B when i have the cash.
> 
> Ztcfg -vv reports
> 
> orange:~# ztcfg -vv
> 
> Zaptel Version: SVN-branch-1.4-r3374
> Echo Canceller: MG2
> Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> 
> 1 channels to configure.
> 
> orange:~#
> 
> 
> and my zaptel.conf file contains
> 
> orange:~# more /etc/zaptel.conf
> fxsks=1
> loadzone=uk
> defaultzone=uk
> orange:~#
> 
> but zap show status in the command line shows
> 
> orange*CLI> zap show status
> Description                              Alarms  IRQ    bpviol CRC4
> Fra Codi Options  LBO
> Wildcard X100P Board 1                   OK      0      0      0
> CAS Unk  YEL      0 db (CSU)/0-133 feet (DSX-1)
> orange*CLI>

I don't see anything wrong here. What is the output of:

  zap show channels

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir