[asterisk-users] E1 to Ethernet Bridge

[Steve Totaro]

Jared Smith wrote:
> On Fri, 2007-08-31 at 12:55 +0000, Arinze Izukanne wrote:
>   
>> I am trying to Bridge 2 E1 interfaces over a long distance link 
>>     
>
> It's really not too difficult... it ends up looking like this:
>
> E1 -> Asterisk A -> IAX2 -> Asterisk B -> E1
>
> Asterisk box A is configured to take calls from the E1, and send the
> calls over IAX2 to box B.  Box B takes calls in over IAX2, and sends
> them out its E1.  (The reverse can also be setup as well, so that calls
> coming into box B over its E1 can be forwarded over IAX2 to box A, and
> so forth.)
>
> Let me know if you need me to go into further detail.
>
>   
Assuming the link you are speaking of is an IP link, then the above 
would work.

I find that SIP is much more reliable, try IAX with trunking and if you 
have problems, give SIP a try and see if that solves your issue.

Thanks,
Steve