[asterisk-users] TE210P digim card PRI problem

[Paul Hales]

You need to look at pri_cpe vs pri_net.

PaulH

On Fri, 2007-08-24 at 01:27 -0700, satish patel wrote:
> Dear all
>   
>                  I have now install TE210P 2 port E1 card on asterisk
> 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with
> avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing
> for outside now i got this error  when i call on avaya PRI 
> 
> asterisk think PRI_CPE and remote end also CPE 
> 
> i have configure /etc/zaptel.conf
> 
> span=1,1,0,ccs,hdb3 
>    bchan=1-15,17-32 
>    dchan=16
> span=1,1,0,ccs,hdb3 
>    bchan=32-46,49-62
>    dchan=47
> 
> 
> in /etc/asterisk/zapata.conf
> 
> switchtype=qsig 
>    context=zap-in 
>    signalling=pri_cpe 
>    group=1 
>    channel => 1-15,17-31
>    
>    group=2
>   channel => 32-46,49-62
> 
> 
> is this configuration is fine or any other problem 
> 
> when i call to my second e1 which i connected to direct telcom i got
> this error
> 
> call can't forward caz voice or dtmf 
> 
> can anyone send my runing configuration file of zaptel.conf or
> zapata.conf  file
> 
> waiting for your reply 
> 
> 
> 
> 
> 
> 
> ______________________________________________________________________
> Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see
> what's on, when. 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users