[asterisk-users] Polycom and NAT

Darryl Dunkin ddunkin at netos.net
Thu Aug 23 01:04:58 CDT 2007


That should do it, it tells Asterisk to override the contact field which
includes the private IP, and use the public IP and port it received the
packet from instead.
 
Try a 'sip debug peer <peer>' and see what it is coming in as.

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Klaverstyn, David C
Sent: Wednesday, August 22, 2007 05:33
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom and NAT



I have both of those command lines for my natted sip device.

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Darryl
Dunkin
Sent: Wednesday, 22 August 2007 1:24 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom and NAT

 

In your sip.conf, for the user:

nat=yes

 

To send keepalives for the UDP connection (depending on how flimsy the
device handling NAT is):

qualify=yes

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Klaverstyn, David C
Sent: Tuesday, August 21, 2007 17:51
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Polycom and NAT

Hi All,

 

I have a Polycom 501 that is behind a NAT.  When it registers to the
Asterisk server it is using the IP address on the private network and
not the public IP of the NAT address.

 

Can someone tell me what I need to do so the phone registerers using an
internet address rather than the remote network NAT address.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/15a0e78c/attachment-0001.htm 


More information about the asterisk-users mailing list