[asterisk-users] TE405/TE410P help updating from 1.0 to 1.4

[Steve Totaro]

Tzafrir Cohen wrote:
> On Mon, Aug 20, 2007 at 09:23:20PM -0400, Jerry Geis wrote:
>   
>> I have a TE405/TE410P card that was working on 1.0.X
>>
>> I upgraded the OS to Centos 4.5, Updated asterisk to 1.4 and zaptel to 
>> 1.4.5 and libpri.
>>
>> I copied all the zaptel and zapata and extensions.conf files from 1.0
>>
>> I did update extensions.conf from 1.0 to 1.4 commands.
>>
>> I cannot get the card to work in 1.4.10. AHHH!
>>
>> I see with zttool that the T1 is in Green, I see calls coming in as the 
>> bits go high on channel 8,
>> zaptel doesnt respond so it tries channel 7 then gives up.
>>
>> Any ideas what this might be??? zaptel modules load, asterisk loads. 
>> ztcfg gives correct reply
>> everything looks good just not working.
>>     
>
> What is the output of a call trace from the CLI:
>
> core set verbose 3
>
>
> And report what you see when you try to call out.
>
>   
Good advice.  Also try pri intense debug span X. 

Before any of that, replace your T1 cable, especially if it is home made 
job.  It is always surprising how much time I have wasted on something, 
when just swapping out a new cable fixed it instantly.

Thanks,
Steve Totaro