[asterisk-users] 1.4.4. caller ID not working ?

[Benjamin Jacob]

Hello All,

Is CALLERID() setting broken in 1.4.4?

My small dialplan :
[testclid]
exten => _0.,1,Set(CALLERID(all)=Ben Jacob <988077>)
exten => _0.,n,Dial(SIP/${EXTEN})

Correct me if I am wrong, Set(CALLERID(all) above supposed to change the 
display name as above(Ben Jacob) and change the From URI to 988077 at myip??

As of now, only the _display name_ is being replaced, but not the name. 
I tried CALLERID(num) as well CALLERID(number), to the same effect(only 
display name being set to number).
Anyone facing similar problems?

Thanks in advance.

- Ben



EMAIL DISCLAIMER : This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Any unauthorised distribution or copying is strictly prohibited. If you receive this transmission in error, please notify the sender by reply email and then destroy the message. Opinions, conclusions and other information in this message that do not relate to official business of Mascon shall be understood to be neither given nor endorsed by Mascon. Any information contained in this email, when addressed to Mascon clients is subject to the terms and conditions in governing client contract.

Whilst Mascon takes steps to prevent the transmission of viruses via e-mail, we can not guarantee that any email or attachment is free from computer viruses and you are strongly advised to undertake your own anti-virus precautions. Mascon grants no warranties regarding performance, use or quality of any e-mail or attachment and undertakes no liability for loss or damage, howsoever caused.