[asterisk-users] Experimenting- Sip dialing with Zap

[David Gomillion]

On 8/16/07, John Meksavan <jmeksavan at hotmail.com> wrote:
>
> line yet. The phone simulator only allow 3 digit dialing. Now, I get this
> message on the Asterisk CLI
>
>     -- Executing [103 at default:1] Dial("SIP/200-006fd1a0",
> "Zap/g0/{EXTEN}")
> in new stack
> [Aug 16 20:22:34] WARNING[14292]: app_dial.c:1106 dial_exec_full: Unable
> to
> create channel of type 'Zap' (cause 0 - Unknown)
>   == Everyone is busy/congested at this time (1:0/0/1)
>   == Auto fallthrough, channel 'SIP/200-006fd1a0' status is 'CHANUNAVAIL'


Just a guess here, but it looks like Asterisk is unable to create channel of
type 'Zap', and that everyone is busy/congested at this time.

Now, figure out if you have valid Zap channels defined in both zaptel.confand
zapata.conf. Make sure you have the right signalling, and the right
indications. Stupid question that I don't have to ask, but will anyway, you
do have the TDM400P actually installed, right?

With these basic questions, you may be better served reading a book about
Asterisk, trying what is in there, googling for answers to any questions you
may have, and then asking the list after you have exhausted all other
resources. We're here to help, but I think that these steps may help give
you a better foundation. And we like it when people have at least tried to
figure out solutions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070816/1915072d/attachment.htm