[asterisk-users] Where I will get astersik.spec and zaptel.spec

[sanchal.singh at alliance-infotech.com]

Hi,
	In response to the question that I posted some time back I got a very
useful reply....

QUESTION
>    I have successfully configured DIGIUM card and successfully
communicated
> through it to the another E1 card running application. Can anybody tell me
> does TE120P support MFC/R2 protocol.


REPLY
As far as I know the card is not the issue. But you need to install
additional software. Basically you need spandsp, libunicall, libmfcr2,
libsupertone and chan_unicall from http://www.soft-switch.org
If you use RHEL or CentOS then you can find a set of Asterisk 1.2 SRPMs
that support this already at: http://www.laimbock.com/dl/asterisk/
You will need to rebuild the SRPMs with the options enabled that you
require. Have a look in zaptel.spec and asterisk.spec.

Regards,
Patrick
(remove -list from my email address if you want to reply privately)

      Thanks for the help that I got from patrick. I need one favour that
can anybody tell me, where,
 I will get zaptel.spec and asterisk.spec file. Is it inside asterisk tar
file or on some link. ( as I could not get in asterisk-1.2.19 tar
file)
Thanks and Regards,
sanchal