[asterisk-users] Incoming and Outgoing zaptel configuration : ISDN30e

[Julian Lyndon-Smith]

Rory Campbell-Lange wrote:
> We are trying to configure a Sangoma A101 card to allow both incoming
> and outgoing calls on a UK (BT) ISDN30e line with only 24 channels
> enabled.
> 
> At present incoming calls work fine. We can't call out -- we get a
> BUSY/CONGESTED error.

What is your dialling plan command for outbound calls ?


> 
> Do we need another context in our zapata.conf? In other words, do we
> need to reserve, say, channels 17-24 for outgoing calls? I also wonder


I think that your

channel => 1-15,17-31

should be

channel => 1-15,17-25

> if the signalling type for these channels should be changed.
> 
> I would be very grateful for any comments.
> 
> Regards
> Rory
> 
> 
> 
> zapata.conf
> =================================================================
> 
> ;autogenerated by /usr/local/sbin/config-zaptel  do not hand edit
> ;Zaptel Channels Configurations (zapata.conf)
> ;
> ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig
> ;Modified by Veselin Wed Aug 15 21:13:58 BST 2007
> ; original saved in zapata.conf.ww
> 
> [trunkgroups]
> 
> [channels]
> language=en
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=no
> echocancelwhenbridged=no
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> 
> ;Sangoma A101 port 1 [slot:3 bus:2 span: 1]
> switchtype=euroisdn
> context=from-pstn
> group=0
> signalling=pri_cpe
> channel => 1-15,17-31
> 
>