[asterisk-users] Major Digium Card Problems

[Michael J. Liberatore]

Hi, I am having some major problems with 2 digium cards in two seperate
servers they are both TDM400P cards one has 4 fxo ports and the other
has 1 fxo port.  
 
First problem, the card with 4 FXO ports is fine until there is a storm
in the area, then all 4 lines are massively static filled making phone
calls barely understandable until the system is rebooted or the zaptel
modules are unloaded and reloaded. There is no problem with other phones
or the previous phone system on these landlines, so i dont think there
is a problem with the lines.
 
Second problem, the card with only 1 fxo port has gone crazy, its
permenantly busy, no matter if i reboot the system, even if the system
is off, the line is still busy until i unplug it from the digium card.
i have no idea whats making the line always busy, this just happened out
of no where.  again reloading modules, rebooting or even shutting down
the system does not make the line un-busy until its unplugged from the
card, big problem since its the only line at the location.
 
I appreciate your help everyone.
 
thank you.
 
Mike
 
 


This E-mail, including any attachments, may be intended solely for 
the personal and confidential use of the sender and recipient(s) named 
above. This message may include advisory, consultative and/or 
deliberative material and, as such, would be privileged and confidential 
and not a public document. Pursuant to 42 CFR, any information in this 
e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070808/384538ef/attachment.htm