[asterisk-users] TE207P Question

[Jeremy Mann]

So would the timing be 0?

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jared Smith
Sent: Tuesday, August 07, 2007 9:31 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TE207P Question

As an added note, you may want to change the timing setting on your
second span= line in zaptel.conf.  If you're acting as the telco, you
might want to send timing to your Nortel, depending on how the Nortel is
configured.  (The way you currently have your spans configured, you're
telling Zaptel to get it's timing from both the telco and the Nortel,
and the card can only sync to one timing source at a time.)

This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please notify Texas Health Management Group immediately at 1-817-310-4999. Texas Health Management Group, its subsidiaries, and affiliates hereby claim all applicable privileges related to this information.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.