[asterisk-users] low-level dump for PRI dchan debugging

[Steve Totaro]

Call Sangoma and give them root if you can.  They will fix it quickly or 
at least give you ammunition that it is the telco's issue.

Thanks,
Steve

Erik Anderson wrote:
> I've been going back and forth with my telco for several days, trying
> different configurations to get a new PRI to come up.  The bchannels
> are all up and the T1 is not in alarm status.  The dchannel refuses to
> come up however.  We've tried ni2, qsig, and now dms100 for the
> switchtype.  The telco tech I've been working with says that he's been
> sending "reset all channels" signals to my system, to which he's
> getting an "establish remote" response from my asterisk box.  I've
> been running a packet dump (wanpipemon -i w1g1 -c trd) of my d-channel
> this whole time and have yet to see a single incoming packet.  I
> believe I *should* be seeing an incoming packet when he sends the
> reset, correct?  Is there any way to do a completely raw dump of the
> d-channel?
>
> Here are my specs:
> linux-2.6.16
> libpri-1.3.5
> zaptel-1.2.19
> asterisk-1.2.21.1
>
> The PRI interface is a Sangoma A102...it's running the latest firmware
> and I'm running wanpipe-2.3.4-12 for the sangoma drivers.
>
> Any ideas?
>
>