[asterisk-users] TDM400P and Junghanns QuadBRI issue

Mon Apr 30 05:59:48 MST 2007

The solution to this issue is to edit /etc/sysconfig/zaptel and add the following line:

  MODULES="$MODULES qozap"        # BRISTUFF driver

  Costa

Henk Dick <henk at osocoms.com> wrote:
        v\:* {behavior:url(#default#VML);}  o\:* {behavior:url(#default#VML);}  w\:* {behavior:url(#default#VML);}  .shape {behavior:url(#default#VML);}                I would check:

  Cat /proc/zaptel/

  To make shure that the cards are activated in the order that you programmed them.

  Henk

---------------------------------

  From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digiuatm.com] On Behalf Of Backup e-mail
Sent: maandag 30 april 2007 13:26
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] TDM400P and Junghanns QuadBRI issue

    Hi List,

    I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns QuadBRI
on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6). 
I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16, libpri-1.2.4 
and asterisk-1.2.17

    When it's the time for ztcfg to do its job it complains with 
<ZT_SPANCONFIG failed on span 2: No such device or address (6)>

    I'm out of ideas what to do to make it to work. Your help is very much appreciated.

    The config files and results from various commands follow.

    Thanks,

Costa.

    ---------------------------------------------------------------
Zaptel Configuration
======================

    SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)

    Channel map:

    Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Loopstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Loopstart (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: D-channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: D-channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: D-channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)

    16 channels configured.

    ZT_SPANCONFIG failed on span 2: No such device or address (6)
---------------------------------------------------------------

    The /etc/modprobe.d/blacklist file contains, amongst others, the following lines:
------------------------------
blacklist hisax
blacklist hisax_fcpcipnp
blacklist 8139cp
blacklist hfc4s8s_l1
------------------------------

    The /etc/zaptel.conf file looks like this:
--------------------- zaptel.conf -----------------------------
# Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
fxsks=1
fxols=2
fxsks=3
fxols=4

    # Span 2-5: Junghans
span=2,1,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
span=5,0,3,ccs,ami

    bchan=5,6
dchan=7
bchan=8,9
dchan=10
bchan=11,12
dchan=13
bchan=14,15
dchan=16

    # Global data

    loadzone        = fr
defaultzone     = fr
---------------------------------------------------

    The <lsmod | grep zap> command gives the following:
-------------------------------------------------------
zaptel      182820  8 wcusb,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2,wctdm
crc_ccitt     6337  2 zaptel,irda
-------------------------------------------------------

    The lspci -vv command returns the following info in relation to the Junghanns card:
----------------------------------------------------
00:0a.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
        Subsystem: Cologne Chip Designs GmbH HFC-4S [IOB4ST]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at d400 [size=8]
        Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
---------------------------------------------------

---------------------------------

  Ahhh...imagining that irresistible "new car" smell?
Check out new cars at Yahoo! Autos. 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

---------------------------------
Ahhh...imagining that irresistible "new car" smell?
 Check outnew cars at Yahoo! Autos.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070430/c0c133bb/attachment.htm