[asterisk-users] TDM400P and Junghanns QuadBRI issue

[Henk Dick]

I would check:

 

Cat /proc/zaptel/

 

To make shure that the cards are activated in the order that you programmed
them.

 

 

Henk

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digiuatm.com] On Behalf Of Backup
e-mail
Sent: maandag 30 april 2007 13:26
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] TDM400P and Junghanns QuadBRI issue

 

Hi List,

 

I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns
QuadBRI
on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6). 
I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16,
libpri-1.2.4 
and asterisk-1.2.17

When it's the time for ztcfg to do its job it complains with 
<ZT_SPANCONFIG failed on span 2: No such device or address (6)>

 

I'm out of ideas what to do to make it to work. Your help is very much
appreciated.

The config files and results from various commands follow.

 

Thanks,


Costa.

---------------------------------------------------------------
Zaptel Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Loopstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Loopstart (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: D-channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: D-channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: D-channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)

16 channels configured.

ZT_SPANCONFIG failed on span 2: No such device or address (6)
---------------------------------------------------------------

 

The /etc/modprobe.d/blacklist file contains, amongst others, the following
lines:
------------------------------
blacklist hisax
blacklist hisax_fcpcipnp
blacklist 8139cp
blacklist hfc4s8s_l1
------------------------------

 

The /etc/zaptel.conf file looks like this:
--------------------- zaptel.conf -----------------------------
# Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
fxsks=1
fxols=2
fxsks=3
fxols=4

# Span 2-5: Junghans
span=2,1,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
span=5,0,3,ccs,ami

bchan=5,6
dchan=7
bchan=8,9
dchan=10
bchan=11,12
dchan=13
bchan=14,15
dchan=16

# Global data

loadzone        = fr
defaultzone     = fr
---------------------------------------------------

 

The <lsmod | grep zap> command gives the following:
-------------------------------------------------------
zaptel      182820  8
wcusb,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2,wctdm
crc_ccitt     6337  2 zaptel,irda
-------------------------------------------------------

 

The lspci -vv command returns the following info in relation to the
Junghanns card:
----------------------------------------------------
00:0a.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller
[HFC-4S] (rev 01)
        Subsystem: Cologne Chip Designs GmbH HFC-4S [IOB4ST]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at d400 [size=8]
        Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
---------------------------------------------------


 

  

  _____  

Ahhh...imagining that irresistible "new car" smell?
Check out new
<http://us.rd.yahoo.com/evt=48245/*http:/autos.yahoo.com/new_cars.html;_ylc=
X3oDMTE1YW1jcXJ2BF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDbmV3LWNhcnM->  cars
at Yahoo! Autos. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070430/c3c978b3/attachment.htm