[asterisk-users] Cisco 7970 with skinny on * 1.4.x

[Richard Klingler]

Sorry bringing it up again....

Meanwhile switched to asterisk 1.4.3 on fbsd-6.2 but still
no luck getting my 7970G to run via skinny...

It registers fine with *:

Adding button: 9, 1
Device capability set to '268'
asterisk*CLI> skinny show devices
Name                 DeviceId         IP              Type            R NL
-------------------- ---------------- --------------- --------------- - --
cisco                SEP00175A872053  xx.xx.xxx.xx    7970            Y  1


But on the phone I just see displayed the time and date but no
linelabel...

My skinny.conf is:

[general]
bindaddr=xx.xx.xxx.xx   ; Address to bind to
bindport=2000           ; Port to bind to, default tcp/2000
dateformat=D.M.Y        ; M,D,Y in any order (5 chars max)
keepalive=30
disallow=all
allow=all               ; see doc/rtp-packetization for framing options

[cisco]
device=SEP00175A872053
model=7970
nat=1
callerid="Richard Klingler" <995>
mailbox=995
callwaiting=yes
transfer=yes
threewaycalling=yes
context=klingler
linelabel="phonelab"
line => 995


any ideas left?

Using now "cmterm-7970_7971-sccp.8-2-2SR1"

cheers
rick