[asterisk-users] Asterisk & Pix firewalls

[shadowym]

That is probably because you did not disable SIP fixup protocol.  When you
set up a PiX correctly it works.  Guaranteed! 

-----Original Message-----
From: Ed Nuñez [mailto:enunez at netoneint.com] 
Sent: Wednesday, April 25, 2007 6:31 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Asterisk & Pix firewalls

Don

 

This may not be a solution to your question, but I would like to share that
I’ve been having one way audio issues when connecting point to sight to a
PIX 515E using SIP.  I changed to IAX and this is working perfectly now.  It
was paynless to configure IAX2, so you might want to consider it.

 

Ed

 

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Don E. Wisdom
Sent: Tuesday, April 24, 2007 8:25 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Asterisk & Pix firewalls

 

Hi,
I asked this last week but i didn't get any answer   So i will elaborate on
my question.   I need to setup a pix 515 firewall (running 7.2.2 OS) to
allow sip traffic thru it from a sip phone wherever i may be.  The pix is
where all my servers are colocated and i will need to connect thru it from
softphones / hardphones wherever i happen to be traveling.   I need help
setting up the pix for inbound and outbound sip/iax traffic.   Any help
would be greatly appreciated.
Thanks
--Don