[asterisk-users] Fast busy on TDM400P

[John Treble]

DR,

Is the failed call scenario **always** terminating on the same X100M?  IME,
it's rarely the Telco line card at fault. :).


John Treble


________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David W. Rice
Sent: April 14, 2007 7:17 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Fast busy on TDM400P

Don’t have an extra machine at the site.  I’m starting to suspect the FXO
module or the telco.  One FXO module hooked to another analog trunk works
flawlessly.  When the client is in the office next, I’m going to have them
switch the cables.

Any other ideas in the meantime?

Thanks,

DR

________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug
Segalowitz
Sent: Saturday, April 14, 2007 3:01 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Fast busy on TDM400P

for kicks lets try setting it up on another machine, if you have an extra
one and see if it still does it. 
 
Astawerks
VoIP Hardware sales and consulting
http://www.astawerks.com
614-495-1400
 

________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David W. Rice
Sent: Saturday, April 14, 2007 1:33 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Fast busy on TDM400P
I did take the NoOp out and there was no difference.

*1.2.17 and zaptel 1.2.16.

Thanks!

DR

________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug
Segalowitz
Sent: Saturday, April 14, 2007 1:30 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Fast busy on TDM400P

Did you try taking NoOP out?    does it work fine then?     What version of
Linux are you using and what version of asterisk? 
 
Astawerks 
VoIP Hardware sales and Consulting
www.astawerks.com
614-495-1400
 

________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David W. Rice
Sent: Saturday, April 14, 2007 12:38 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Fast busy on TDM400P
I’m getting a random fast busy signal after two rings on an incoming ZAP
channel through an FXO interface on a TDM400P.  I have a NoOp in the dial
plan showing the callerID.  When the random fastbusy happens, no CallerID is
sent.  When it works, the CallerID information is sent.  Is this a card
issue or a telco issue?  I have a very upset client and need to figure out
how to resolve this.

Thanks,

DR

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 4/13/2007
8:04 PM

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 4/13/2007
8:04 PM

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 4/13/2007
8:04 PM