[asterisk-users] Fast busy on TDM400P

[David W. Rice]

Don't have an extra machine at the site.  I'm starting to suspect the
FXO module or the telco.  One FXO module hooked to another analog trunk
works flawlessly.  When the client is in the office next, I'm going to
have them switch the cables.

 

Any other ideas in the meantime?

 

Thanks,

 

DR

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug
Segalowitz
Sent: Saturday, April 14, 2007 3:01 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Fast busy on TDM400P

 

for kicks lets try setting it up on another machine, if you have an
extra one and see if it still does it. 

 

Astawerks

VoIP Hardware sales and consulting

http://www.astawerks.com <http://www.astawerks.com/> 

614-495-1400

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David W.
Rice
Sent: Saturday, April 14, 2007 1:33 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Fast busy on TDM400P

I did take the NoOp out and there was no difference.

 

*1.2.17 and zaptel 1.2.16.

 

Thanks!

 

DR

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug
Segalowitz
Sent: Saturday, April 14, 2007 1:30 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Fast busy on TDM400P

 

Did you try taking NoOP out?    does it work fine then?     What version
of Linux are you using and what version of asterisk? 

 

Astawerks 

VoIP Hardware sales and Consulting

www.astawerks.com <http://www.astawerks.com/> 

614-495-1400

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David W.
Rice
Sent: Saturday, April 14, 2007 12:38 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Fast busy on TDM400P

I'm getting a random fast busy signal after two rings on an incoming ZAP
channel through an FXO interface on a TDM400P.  I have a NoOp in the
dial plan showing the callerID.  When the random fastbusy happens, no
CallerID is sent.  When it works, the CallerID information is sent.  Is
this a card issue or a telco issue?  I have a very upset client and need
to figure out how to resolve this.

 

Thanks,


DR

 

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 4/13/2007
8:04 PM

 

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 4/13/2007
8:04 PM

 

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 4/13/2007
8:04 PM


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 4/13/2007
8:04 PM


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070414/d6db0a3c/attachment.htm