[asterisk-users] zaptel/ssh interaction

[Greg Woods]

On Sat, 2007-04-14 at 14:17 -0500, Lacy Moore - Aspendora wrote:

> 
> This was mentioned earlier:
> 
> >I suspect IRQ Sharing. 

I know. And I posted my /proc/interrupts showing that there were no
shared IRQ's.


> 
> And from the rest, it sounds like your network card and Digium card
> are both sharing the same interrupt.  

How would that explain that only RSA key processing is affected? Other
network-related things are working fine.

# cat /proc/interrupts
           CPU0       
  0:  670560442   IO-APIC-edge      timer
  1:      20079   IO-APIC-edge      i8042
  6:          2   IO-APIC-edge      floppy
  7:          0   IO-APIC-edge      parport0
  8:          1   IO-APIC-edge      rtc
  9:          0   IO-APIC-fasteoi   acpi
 12:      23344   IO-APIC-edge      i8042
 14:    1073586   IO-APIC-edge      ide0
 15:    5943428   IO-APIC-edge      ide1
 16:       5554   IO-APIC-fasteoi   libata
 17:    1441409   IO-APIC-fasteoi   uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
 18:   23387293   IO-APIC-fasteoi   eth0
 19:  613419658   IO-APIC-fasteoi   wctdm
 20:    2592107   IO-APIC-fasteoi   eth1
 21:       2597   IO-APIC-fasteoi   Ensoniq AudioPCI
NMI:          0 
LOC:  670560322 
ERR:          0
MIS:          0

> Can you move the card to another
> slot?

I don't have any other open slots, but I could try swapping some cards
between slots. I've got three PCI slots occupied by the eth1 network
card, the Digium card, and the Ensoniq sound card. Given the
above /proc/interrupts, is swapping slots likely to help?

> 
> As far as Zaptel compiling, there was a previous thread about Zaptel
> on CentOS 5.  It could possibly be related.

I will search for that, thanks.

--Greg