[asterisk-users] zaptel/ssh interaction

[Lacy Moore - Aspendora]

On 4/14/07, Greg Woods <greg at gregandeva.net> wrote:
> Even worse, I discovered
> that the same problem affects racoon/ipsec-tools as well; I get racoon
> errors in the log about hash mismatches and messages too short. Unload
> the zaptel drivers, and the tunnel is established immediately. I was
> hoping to work around the ssh problem by using an IPSEC tunnel to a
> known secure remote location, but then I run into another variant of the

This was mentioned earlier:

>I suspect IRQ Sharing.  "cat /proc/interrupts" to see.  If you are
>seeing more than 1 device on the same IRQ, see the mailing list archives
>on ways to resolve this.

And from the rest, it sounds like your network card and Digium card
are both sharing the same interrupt.  Can you move the card to another
slot?

As far as Zaptel compiling, there was a previous thread about Zaptel
on CentOS 5.  It could possibly be related.