[asterisk-users] Cisco GW, PRI & CallerID Name

[Yehavi Bourvine +972-8-9489444]

> Does anybody have callerid name coming in on a Cisco PRI via a Cisco
> gateway via SIP to *?  I've seen a few people ask and a few people that
> say it should work, but I've never seen an actual working config.

I have it working, but it depends on the specific configuration. I have it
working via PRI/Q.sig to a Nortel TX-1. The key issue here is that the name can
be sent in two ways: via the Q.931 and via Q.sig. Nortel supports only Q.sig,
and you need to enable it on the Cisco. If this is your case then tell me and
I'll send the config.

                                     __Yehavi: