[asterisk-users] Digium B410P Need Help

[Farooq Ahmed]

Yes i tried but nothing change
Regards
Farooq
Quoting yusuf <yusuf at ecntelecoms.com>:

> Farooq Ahmed wrote:
> > Hi All
> > Trying to install Digium B410P on Trixbox 2. After initializing
> card driver and asterisk i m getting 
> > follow message asterisk shows no port.
> > Would be kind enough if somebody help me.
> > Regards
> > Farooq
> > 
> > #misdnportinfo
> > 
> > Port  1: TE-mode BRI S/T interface line (for phone lines)
> >  -> Protocol: DSS1 (Euro ISDN)
> >  -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE
> lib.
> >  -> childcnt: 2
> >  * Port NOT useable for PBX
> > --------
> > Port  2: TE-mode BRI S/T interface line (for phone lines)
> >  -> Protocol: DSS1 (Euro ISDN)
> >  -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE
> lib.
> >  -> childcnt: 2
> >  * Port NOT useable for PBX
> > --------
> > Port  3: NT-mode BRI S/T interface port (for phones)
> >  -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT
> lib.
> >  * Port NOT useable for PBX
> > --------
> > Port  4: NT-mode BRI S/T interface port (for phones)
> >  -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT
> lib.
> >  * Port NOT useable for PBX
> Hi,
> 
> in /etc/misdn-init.conf,  switch the mode to te_ptmp= or something.
> 
> -- 
> thanks,
> Yusuf
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 


--