[asterisk-users] Digium B410P Need Help

[yusuf]

Farooq Ahmed wrote:
> Hi All
> Trying to install Digium B410P on Trixbox 2. After initializing card driver and asterisk i m getting 
> follow message asterisk shows no port.
> Would be kind enough if somebody help me.
> Regards
> Farooq
> 
> #misdnportinfo
> 
> Port  1: TE-mode BRI S/T interface line (for phone lines)
>  -> Protocol: DSS1 (Euro ISDN)
>  -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
>  -> childcnt: 2
>  * Port NOT useable for PBX
> --------
> Port  2: TE-mode BRI S/T interface line (for phone lines)
>  -> Protocol: DSS1 (Euro ISDN)
>  -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
>  -> childcnt: 2
>  * Port NOT useable for PBX
> --------
> Port  3: NT-mode BRI S/T interface port (for phones)
>  -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib.
>  * Port NOT useable for PBX
> --------
> Port  4: NT-mode BRI S/T interface port (for phones)
>  -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib.
>  * Port NOT useable for PBX
Hi,

in /etc/misdn-init.conf,  switch the mode to te_ptmp= or something.

-- 
thanks,
Yusuf