[asterisk-users] ZAP device reference in Zaptel 1.4

[Devraj Mukherjee]

Hi Yuan,

zaptel is in fact loaded. Wonder what's going wrong?

[root at monk ~]# lsmod
Module                  Size  Used by
wcusb                  18976  0
wctdm                  34752  0
wcfxo                  13472  0
wctdm24xxp             69696  0
wcte11xp               24608  0
wct1xxp                15904  0
wct4xxp               229312  0
tor2                   89760  0
zaptel                184100  10
wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2
parport_pc             28033  0
lp                     15661  0
parport                38025  2 parport_pc,lp
autofs4                23109  0
sunrpc                144037  1
md5                     8129  1
ipv6                  242657  28
crc_ccitt               6209  1 zaptel
dm_mirror              31901  0
dm_mod                 60741  1 dm_mirror
button                 10705  0
battery                12997  0
ac                      8901  0
joydev                 14337  0
uhci_hcd               32857  0
ehci_hcd               32325  0
tg3                   101189  0
e1000                 109369  0
floppy                 58193  0
ext3                  119113  2
jbd                    59609  1 ext3
raid1                  19649  3
ata_piix               15557  6
libata                 67613  1 ata_piix
sd_mod                 20545  8
scsi_mod              117709  2 libata,sd_mod

On 4/4/07, Yuan LIU <yliu11 at hotmail.com> wrote:
> >From: "Devraj Mukherjee" <devraj at gmail.com>
> >Date: Wed, 4 Apr 2007 11:46:11 +1000
> >
> >Hi Eric,
> >
> >Thanks for your suggestion
> >
> >I just reinstalled Asterisk, it still doesn't seem to know anything
> >about Zaptel. I am using CentOS and installed Asterisk using yum from
> >ATrpms.
> >
> >Anything else I can try?
>
> Try lsmod to confirm that zaptel is indeed installed.  I'm not familiar with
> CentOS or yum, but I assume you installed a binary package, so chan_zap.so
> is probably included.  Hope this helps.
>
> Yuan Liu
>
> >On 4/4/07, Eric ManxPower Wieling <eric at fnords.org> wrote:
> >>Devraj Mukherjee wrote:
> >> > Hi Everyone,
> >> >
> >> > I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS
> >> > modules. The card works and ztcfg reports that it finds the two
> >> > modules.
> >> >
> >> > Howevery when I try and place a call through the gateway I get the
> >> > following error message. I have tried to refer to the ZAP device as
> >> > ZAP/g2 etc
> >> >
> >> > Any suggestions? Anything that's different about Zaptel 1.4?
> >> >
> >> >    -- Executing [169223139 at default:1]
> >> > SetCDRUserField("SIP/103-b7802230", ""Telstra"") in new stack
> >> >    -- Executing [169223139 at default:2] Dial("SIP/103-b7802230",
> >> > "ZAP/4/69223139") in new stack
> >> > [Apr  4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No
> >> > channel type registered for 'ZAP'
> >> > [Apr  4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full:
> >> > Unable to create channel of type 'ZAP' (cause 66 - Channel not
> >> > implemented)
> >>
> >>You need to reinstall Asterisk.  You installed Asterisk before
> >>installing Zaptel so Asterisk did not build anything that requires Zaptel.
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
"I never look back darling, it distracts from the now", Edna Mode (The
Incredibles)