[asterisk-users] ZAP device reference in Zaptel 1.4

[Yuan LIU]

>From: "Devraj Mukherjee" <devraj at gmail.com>
>Date: Wed, 4 Apr 2007 11:46:11 +1000
>
>Hi Eric,
>
>Thanks for your suggestion
>
>I just reinstalled Asterisk, it still doesn't seem to know anything
>about Zaptel. I am using CentOS and installed Asterisk using yum from 
>ATrpms.
>
>Anything else I can try?

Try lsmod to confirm that zaptel is indeed installed.  I'm not familiar with 
CentOS or yum, but I assume you installed a binary package, so chan_zap.so 
is probably included.  Hope this helps.

Yuan Liu

>On 4/4/07, Eric ManxPower Wieling <eric at fnords.org> wrote:
>>Devraj Mukherjee wrote:
>> > Hi Everyone,
>> >
>> > I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS
>> > modules. The card works and ztcfg reports that it finds the two
>> > modules.
>> >
>> > Howevery when I try and place a call through the gateway I get the
>> > following error message. I have tried to refer to the ZAP device as
>> > ZAP/g2 etc
>> >
>> > Any suggestions? Anything that's different about Zaptel 1.4?
>> >
>> >    -- Executing [169223139 at default:1]
>> > SetCDRUserField("SIP/103-b7802230", ""Telstra"") in new stack
>> >    -- Executing [169223139 at default:2] Dial("SIP/103-b7802230",
>> > "ZAP/4/69223139") in new stack
>> > [Apr  4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No
>> > channel type registered for 'ZAP'
>> > [Apr  4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full:
>> > Unable to create channel of type 'ZAP' (cause 66 - Channel not
>> > implemented)
>>
>>You need to reinstall Asterisk.  You installed Asterisk before
>>installing Zaptel so Asterisk did not build anything that requires Zaptel.