[asterisk-users] x100p not showing in core show channels

[Tzafrir Cohen]

On Tue, Apr 03, 2007 at 11:17:57PM +0200, bram kortleven wrote:
> Hi,
> 
> I recently decided to change my setup from AsteriskNow to plain-asterisk
> 1.4, which I wanted to set up and configure myself on a server running
> Debian Etch 64bit version.
> 
> Hardware:
> Asrock motherboard, model 775Dual880-Pro, with a Celeron D running at
> 2.8GHz, 1GB memory, standard Nvidia GF4MX videocard, and one X100P clone
> card.
> 
> Running the AsteriskNow, everything worked fine, except for incoming
> calls, not being routed right, but they entered the system, and mostly
> they ended up into the voicemail.
> 
> To change that behaviour and to have more control of what I'm doing, I
> reinstalled the same machine with Debian Etch, the 64bit version, as the
> CPU (and the replacing one in a few weeks) runs EM64T nicely...
> The setup ran OK, compilation etc too, except for zttool which I still
> cannot compile.

  apt-get build-dep zaptel

Or specifically:

  apt-get install libncurses-dev

(or something similar)

> 
> When configging the server, I used several HowTo's and guides, but no
> solution:
> 
> hereby the config parts that I did/changed:
> 
> /etc/zaptel.conf:
> 
> # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
> # Zaptel Configuration File
> # This file is parsed by the Zaptel Configurator, ztcfg
> # It must be in the module loading order
> # Span 1: WCFXO/0 "Generic Clone Board 1"
> fxsks=1
> # Global data
> loadzone        = be
> defaultzone     = be
> 
> 
> /etc/asterisk/zapata.conf:
> 
> [channels]
> signalling=fxs_ks
> group=1
> context=incoming
> channel=>1 ;X100P
> 
> 
> /etc/asterisk/extensions.conf:
> [incoming]
> exten => s,1,Echo ;for testing the connection
> ;exten => s,1,Playback,demo-thanks ;for playing a file
> 
> 
> Nothing happens when dialing in.
> 
> BUT:
> ztmonitor 01 -vv gives levels, and when dialing in, the levels change
> according to dialtone in my phone I use for calling the server.
> 
> AND:
> core show channels gives me this:
> 
> asterisk*CLI> core show channels verbose
> Channel              Context              Extension        Prio State  
> Application  Data                      CallerID        Duration
> Accountcode BridgedTo          
> 0 active channels
> 0 active calls
> 
> 
> 
> What am I doing wrong???
> Anyone that can give a hand?

What is the output of:

  zap show channels

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir