[asterisk-users] Re: mISDN, 2 Billion HFC ISDN cards,
cannot dial or receive
Nigel Godfrey
nigelcgodfrey+asterisk-users at gmail.com
Thu Sep 28 18:42:15 MST 2006
UPDATE
I can now dial and receive ISDN calls, but get an error message on the
console intermitently and on boot.
The error message is:
mISDN dss1 fromup without proc pr=10180 dinfo(0)
I don't know what any part of this means. Any thoughts please?
Solution so far:
http://www.asteriskguru.com/tutorials/bri.html has a good description
of the difference between PTP and PTMP. I was incorrectly set to
PTMP, and have now changed that.
I also followed instructions from
http://www.cognovis.de/entwickler/tips/asterisk/hardware/ and removed
Hisax.
After these two changes i could dial and receive BRI calls. I suspect
Hisax was the critical one, as my other machine runs fine under PTMP.
mISDN dss1 fromup without proc pr=10180 dinfo(0)
>
> On 26/09/06, Nigel Godfrey <nigelcgodfrey+asterisk-users at gmail.com> wrote:
> > I have two similar Billion HFC cards working on a bri-stuffed Asterisk
> > 0.99 server which has run my phone system in the UK for 2 years
> > without fault. The hardware is getting old, and I thought it wilse to
> > upgrade at my own speed, rather than in response to a failure.
> >
> > I've installed Asterisk 1.2.12.1 via the Beronet "install-asterisk"
> > script and it appears to have installed mISDN correctly too.
> >
> > Placing a call to ISDN I get silence for 6 seconds, and then the call
> > is dropped.
> >
> > Placing an incoming call over the PSTN from my mobile phone, i get no
> > acknowledgement from the Asterisk, and a continuous tone from the
> > mobile.
> >
> > The mISDN log (log level 4) for the outgoing call is below.
> >
> > Does anyone have a similar system working? Does anyone know why
> > nothing appears to happen?
> >
> > I'll post a solution when I get one...
> >
> > Thanks,
> >
> > Nigel.
> >
> >
> > Tue Sep 26 21:48:04 2006: P[ 0] --> Group Call group: bri
> > Tue Sep 26 21:48:04 2006: P[ 1] Group [bri] Port [1]
> > Tue Sep 26 21:48:04 2006: P[ 1] portup:1
> > Tue Sep 26 21:48:04 2006: P[ 0] --> * NEW CHANNEL dad:02012345678 oad:(null)
> > Tue Sep 26 21:48:04 2006: P[ 1] * Queuing chan 0x958c0a0
> > Tue Sep 26 21:48:04 2006: P[ 1] read_config: Getting Config
> > Tue Sep 26 21:48:04 2006: P[ 1] config_jb: Called
> > Tue Sep 26 21:48:04 2006: P[ 1] --> * CallGrp: PickupGrp:
> > Tue Sep 26 21:48:04 2006: P[ 1] --> TON: Unknown
> > Tue Sep 26 21:48:04 2006: P[ 1] --> LTON: Unknown
> > Tue Sep 26 21:48:04 2006: P[ 1] --> CTON: Unknown
> > Tue Sep 26 21:48:04 2006: P[ 1] * CALL: g:bri/02012345678
> > Tue Sep 26 21:48:04 2006: P[ 1] --> * dad:02012345678
> > tech:mISDN/1-u3 ctx:incoming
> > Tue Sep 26 21:48:04 2006: P[ 1] --> * adding2newbc ext 02077347184
> > Tue Sep 26 21:48:04 2006: P[ 1] --> * adding2newbc callerid 31
> > Tue Sep 26 21:48:04 2006: P[ 1] update_config: Getting Config
> > Tue Sep 26 21:48:04 2006: P[ 1] --> pres: 1 screen: 1
> > Tue Sep 26 21:48:04 2006: P[ 1] NO OPTS GIVEN
> > Tue Sep 26 21:48:04 2006: P[ 1] I SEND:SETUP oad:31 dad:02012345678 pid:5
> > Tue Sep 26 21:48:04 2006: P[ 1] --> bc_state:BCHAN_CLEANED
> > Tue Sep 26 21:48:04 2006: P[ 1] --> channel:0 mode:TE cause:16
> > ocause:16 rad: cad:
> > Tue Sep 26 21:48:04 2006: P[ 1] --> info_dad: onumplan:0 dnumplan:0
> > rnumplan:0 cpnnumplan:0
> > Tue Sep 26 21:48:04 2006: P[ 1] --> caps:Speech pi:0 keypad:
> > sending_complete:0
> > Tue Sep 26 21:48:04 2006: P[ 1] --> screen:1 --> pres:1
> > Tue Sep 26 21:48:04 2006: P[ 1] --> addr:0 l3id:50003 b_stid:0 layer_id:0
> > Tue Sep 26 21:48:04 2006: P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
> > Tue Sep 26 21:48:04 2006: P[ 1] --> urate:0 rate:16 mode:0 user1:0
> > Tue Sep 26 21:48:04 2006: P[ 1] --> bc:953e504 h:0 sh:0
> > Tue Sep 26 21:48:04 2006: P[ 1] --> new_l3id 50004
> > Tue Sep 26 21:48:04 2006: P[ 1] Sending msg, prim:30580 addr:41000104
> > dinfo:50004
> > Tue Sep 26 21:48:04 2006: P[ 1] --> * SEND: State Dialing pid:5
> > Tue Sep 26 21:48:10 2006: P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
> > Tue Sep 26 21:48:10 2006: P[ 1] --> lib: RELEASE_CR Ind with l3id:50004
> > Tue Sep 26 21:48:10 2006: P[ 1] --> lib: CLEANING UP l3id: 50004
> > Tue Sep 26 21:48:10 2006: P[ 1] empty_chan_in_stack: 255
> > Tue Sep 26 21:48:10 2006: P[ 1] $$$ CLEANUP CALLED pid:5
> > Tue Sep 26 21:48:10 2006: P[ 1] $$$ Already cleaned up bc with stid :0
> > Tue Sep 26 21:48:10 2006: P[ 1] I IND :CLEAN_UP oad: dad: pid:5 state:CALLING
> > Tue Sep 26 21:48:10 2006: P[ 1] hangup_chan
> > Tue Sep 26 21:48:10 2006: P[ 1] -> queue_hangup
> > Tue Sep 26 21:48:10 2006: P[ 1] release_chan: bc with l3id: 50004
> > Tue Sep 26 21:48:10 2006: P[ 1] * RELEASING CHANNEL pid:5
> > ctx:incoming dad:02077347184 oad:02077347184 state: CALLING
> > Tue Sep 26 21:48:10 2006: P[ 1] --> * State Down
> > Tue Sep 26 21:48:10 2006: P[ 1] --> Setting AST State to down
> >
>
More information about the asterisk-users
mailing list