[asterisk-users] How to Dial a number with Sangoma PRI card?
mgnospam at fgasoftware.com
Tue Sep 19 02:13:32 MST 2006
That's ok if I want to dial through a group. But, for my specific
requirements, I need to dial through a specific channel. I even need to
use the ChanIsAvail application to discover which channels are available.
Thus, without using a group, which is the correct way to dial through a PRI?
Lacy Moore - Aspendora wrote:
> I dial using groups. Dial(Zap/g1/1234)
> I'm pretty sure this was taken off of the examples on the Sangoma website.
> On 9/19/06, *Mario* <mgnospam at fgasoftware.com
> <mailto:mgnospam at fgasoftware.com>> wrote:
> I have a Sangoma PRI card configured for E1 line (i.e. 30+1
> channels per
> port) and I'm not quite sure on how the Dial command should
> I'm using the standard Dial command as if it were a Zap channel.
> For example
> Dial(Zap/1/1234) ; Dial 1234 using channel 1 on port 1
> Dial(Zap/32/1234) ; Dial 1234 using channel 1 on port 2 (i.e. 32nd
> zapata entry)
> Most often than not this works, but sometimes the call fails. However,
> reading the Asterisk docs, it says that to dial using a PRI card I
> should use, instead, the following command:
> Dial(Zap/1-1/1234) ; Dial using channel 1 on port 1
> Dial(Zap/2-1/1234) ; Dial using channel 1 on port 2
> Which one is correct? Should I dial Zap/32 or Zap/2-1 to go
> through the
> 1st channel on port 2?
> I'm scared of changing my whole dial plan and then discover that,
> occasionally, things do not work as expected.
> Please, can someone who has used Sangoma PRI card help me? My
> Zapata.conf is set as if we had 60+ channels (something similar to
> context = my_context
> group = 1
> signalling = pri_cpe
> switchtype = euroisdn
> channel => 1-15, 17-31 ; Same, up to channel 62
> Thanks in advance.
> --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com> --
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> Lacy Moore
> Aspendora, Inc.
More information about the asterisk-users