[asterisk-users] QuadBRI and Zyxel Wifi phone stop working togetherafter 3 calls

[Frederik Fix]

Just tried it. When I run "sip show channels" it doesnt show any open  
channels.

Thanks,
Frederik

On 14 Sep 2006, at 03:27, Bill Gibbs wrote:

> Make those calls then check the CLI "sip show channels" and see if the
> channels are stay up
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Frederik
> Fix
> Sent: Wednesday, September 13, 2006 8:35 PM
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] QuadBRI and Zyxel Wifi phone stop working
> togetherafter 3 calls
>
> Hi,
> I have a strange problem that I have no idea how to debug:
>
> I have a Zyxel Prestige 2000W Wifi telephone that is connected to my
> Asterisk server which has a Junghanns.net QuadBRI card. I can make
> exactly 3 calls to the "outside" over the QuadBRI. Any calls after
> that fail with the log saying that all lines are busy.
>
> Turning the phone off and on solves the problem and I can make 3
> calls again before it repeats. This problem does not occur when I
> make calls from my Cisco 7960G phones using SCCP or using eyebeam and
> SIP. Also making calls from the Zyxel through a cheap Cologne chipset
> ISDN card using zaphfc does not show this problem.
>
> I am using the following versions:
> Asterisk 1.2.9.1-BRIstuffed-0.3.0-PRE-1r
> Zyxel Prestige 2000W (version 1)
> Zyxel-Firmware: Wj.00.11
>
>
> Any help is very much appreciated,
>
> Frederik
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users