[asterisk-users] QuadBRI and Zyxel Wifi phone stop working togetherafter 3 calls

[Bill Gibbs]

Make those calls then check the CLI "sip show channels" and see if the
channels are stay up

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Frederik
Fix
Sent: Wednesday, September 13, 2006 8:35 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] QuadBRI and Zyxel Wifi phone stop working
togetherafter 3 calls

Hi,
I have a strange problem that I have no idea how to debug:

I have a Zyxel Prestige 2000W Wifi telephone that is connected to my  
Asterisk server which has a Junghanns.net QuadBRI card. I can make  
exactly 3 calls to the "outside" over the QuadBRI. Any calls after  
that fail with the log saying that all lines are busy.

Turning the phone off and on solves the problem and I can make 3  
calls again before it repeats. This problem does not occur when I  
make calls from my Cisco 7960G phones using SCCP or using eyebeam and  
SIP. Also making calls from the Zyxel through a cheap Cologne chipset  
ISDN card using zaphfc does not show this problem.

I am using the following versions:
Asterisk 1.2.9.1-BRIstuffed-0.3.0-PRE-1r
Zyxel Prestige 2000W (version 1)
Zyxel-Firmware: Wj.00.11


Any help is very much appreciated,

Frederik

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users